Heavy Duty Horse Friendly Vehicle Barrier

   
     

           
           


 

DESCRIPTION:

Manufactured from 100mm x 50mm RHS, and hot dipped galvanised after manufacture. The PADLOCK SECURITY BOX system is incorporated into the slam post thus allowing the barrier to be used either left or right handed.

Width as required, with a minimum of 10’(3m) Maximum installed height at centre should be 25cm. The size of the central gap is 1.2m wide at the bottom and 2.0m at the top.

The timber cladding rails have been incorporated in the design to dampen the noise of contact with hooves. This design is best suited over softer terrain.

Available in 3 sizes

12’(3.6m) barrier - LE F010 2021 36
14’(4.2m) barrier - LE F010 2021 42
16’(4.8m) barrier - LE F010 2021 48

Posts

120 X 120 SHS HANG - XX F010 2082 12
120 X 120 SHS SLAM - LE F010 2082 30
c/w PAD SEC BOX

150 X 150 SHS HANG - XX F010 2083 12
150 X 150 SHS SLAM - LE F010 2083 30
c/w PAD SEC BOX


 
...........................................................................................................................................................................................................................
     
   

Website Design Staffordshire by SO Marketing